AIRCAM AIRCAM — Checklist

This document is a checklist for the AirCam aircraft, detailing procedures for start-up, engine run-up, pre-takeoff, landing, and emergency procedures. It provides step-by-step instructions to ensure safe operation and maintenance of the aircraft.

• Pre-flight checks include inspecting floats and ensuring fuel levels are adequate.
• Engine start-up requires checking oil pressure and voltage.
• Lift-off speed is 43 mph IAS for both land and water takeoffs.
• Normal climb speed is 60 mph IAS.
• Emergency procedures include steps for engine failure and landing gear malfunction.
• Flaps should be set to 25 degrees for water takeoff and landing.
• Use full flaps for rough water landings only.
• Check for fluid leaks and propeller damage during pre-flight inspections.