DEHAVILLAND DHC-2 — Checklist
1 checklist reference for the DEHAVILLAND DHC-2.
Overview
DHC-2 Beaver Checklists & References
This document is a checklist for the de Havilland DHC-2 Beaver aircraft, detailing normal operations and emergency procedures. It provides step-by-step instructions for engine start, taxiing, takeoff, landing, and handling emergencies.
- Ensure propeller area is clear before starting the engine.
- Throttle should be set to 1/4 to 1/2 inch open during engine start.
- Monitor oil pressure; if it does not register within 30 seconds, stop the engine.
- Perform engine warmup after oil temperature reaches 100°F (40°C).
- Use full rich mixture for takeoff and landing.
- Maintain a climb speed of 65 MPH after takeoff.
- In case of engine failure, keep airspeed and follow emergency procedures.
- Always check fuel selector and engine gauges before takeoff.
Summary written by AI from the source document. Check the original before relying on it. See which parts of Sprinkle are written by AI.
Reference only, not for flight. Use the current approved manual for your aircraft. See terms, section 5.
1 document
