ENSTROM 480B — Checklist
1 checklist reference for the ENSTROM 480B.
Overview
ENSTROM 480 XJQ Checklist komplett
This document is a checklist for the Enstrom 480B helicopter, detailing the procedures for preparation, engine start, engine cool down, and post-landing actions. It includes specific checks and actions to ensure safe operation of the helicopter.
- Complete outside check and flight log before starting.
- Ensure all switches are off and circuit breakers are in before engine start.
- Monitor TOT limits during engine start.
- Perform a departure briefing before takeoff.
- Check warning lights and caution panel before engine start.
- Throttle should be full open during engine run-up.
- Lock collective friction after landing.
- Turn off all switches except BATT and strobe lights after landing.
Summary written by AI from the source document. Check the original before relying on it. See which parts of Sprinkle are written by AI.
Reference only, not for flight. Use the current approved manual for your aircraft. See terms, section 5.
1 document
