Guimbal Cabri G2 One-page Checklist CZ rev. 2023-05-09
GUIMBAL CABRI G2 · Checklist
Overview
This document is a checklist for the Guimbal Cabri G2 helicopter, detailing pre-flight, start-up, and shut-down procedures. It ensures that all necessary systems and components are checked and set correctly before and after flight operations.
- Ensure all safety belts are fastened.
- Check that the cockpit is secured.
- Verify fuel mixture is fully rich.
- Rotor brake must be secured before start.
- Monitor oil pressure and engine RPM during start.
- Record flight data after landing.
- Ensure all lights are operational as required.
- Governor settings must be checked before and after flight.
Summary written by AI from the source document. Check the original before relying on it. See which parts of Sprinkle are written by AI.
Reference only, not for flight. Use the current approved manual for your aircraft. See terms, section 5.
Document
Source
Copy found at lionheli.aero. Sprinkle hosts a reference copy with an added summary, specifications and searchable full text.
Document details
- Type ·
- Checklist
- Year ·
- 2023
- File size ·
- 152 KB
- Copy found at ·
- lionheli.aero
- Language ·
- cs
What is the Guimbal Cabri G2 One-page Checklist CZ rev. 2023-05-09?
The Guimbal Cabri G2 One-page Checklist CZ rev. 2023-05-09 is a checklist for the GUIMBAL CABRI G2, dated 2023.
What year was the Guimbal Cabri G2 One-page Checklist CZ rev. 2023-05-09 published?
The Guimbal Cabri G2 One-page Checklist CZ rev. 2023-05-09 — the GUIMBAL CABRI G2 checklist on file — is dated 2023.
Common. More common than 90% of the aircraft models we track.
Most owners only have the POH. Here's the essential set for the GUIMBAL CABRI G2.
GUIMBAL CABRI G2 for sale now
Free — save the CABRI G2 to your watchlist and track it in one place.
More GUIMBAL CABRI G2manuals & documents
- GUIMBAL CABRI G2 Model GuideModel Guide
- SERVICE BULLETIN SB 25-006 BService Bulletins
- SERVICE BULLETIN SB 24-001 CService Bulletins
- Cabri G2 Maintenance ManualMaintenance Manual
- Cabri G2 HB-ZTYChecklist
- Illustrated Parts Catalog Helicopteres GuimbalParts Catalog
- Cabri G2 Flight ManualFlight Manual Supplement
- J40-001 Issue 05 - Cabri G2 Flight ManualPilot's Operating Handbook
- CABRI G2 Flight ManualPilot's Operating Handbook
Related documents
- Letová příručka pro letadlo VL-3E-1 s motorem Rotax 912ULSJMB Aircraft VL-3 Evolution · Pilot's Operating Handbook
- Letová a provozní příručka pro vírník Cavalon 915iSAUTOGYRO Cavalon 915 iS · Pilot's Operating Handbook
- CHECK-LIST NORMALE PIPER PA 18-95 F-GJSGPIPER PA-18 · Checklist
- Tecnam P2002 JF ChecklistTECNAM P2002 SIERRA · Checklist
- H125-AS350B3e-Checklist-FullEUROCOPTER AS350B3E · Checklist
If you fly the GUIMBAL CABRI G2, you may also be researching these.
In this document
Pre-Flight Checks
Includes checks for safety belts, cockpit security, and fuel mixture settings.
Starting Procedures
Details the steps for starting the helicopter, including ignition and monitoring engine parameters.
Before Takeoff
Covers checks for rotor RPM, collective lock, and engine cooling.
Shutdown Procedures
Outlines the steps for safely shutting down the helicopter after flight.
Fuel and Time Recording
Instructs to record fuel levels and Hobbs time after each flight.
Safety Checks
Emphasizes the importance of ensuring all systems are operational and within limits.
Summary written by AI from the source document. Check the original before relying on it. See which parts of Sprinkle are written by AI.
Safety notes
- Ensure the rotor brake is secured before starting.
- Monitor engine temperatures to avoid overheating.
- Do not exceed maximum rotor RPM during start.
- Check that the area is clear before starting the helicopter.
- Record all flight data accurately.
Summary written by AI from the source document. Check the original before relying on it. See which parts of Sprinkle are written by AI.
Full document text
Upínací pásy ................................................................... Oboje zapnuté Kokpit ..................................................... Všechny objekty zabezpečeny Pedály ..................................................................... Volný chod, neutrál Cyklika ................................................................ Volný chod, uprostřed Kolektiv ..................................... Odjistit, volný chod, plně dole, aretace Governor ..........................................................................................OFF Pojistky, palivový kohout, ELT .................. Zatlačeny, otevřený, ARMED Zapalování ............................................................................. Oboje OFF Rotorová brzda ............................................................ Zajištěna vpředu Směs paliva ......................................................................... Plně bohatá MASTER, BARC ...................................................................ON, BACKUP Kontrolky, vyjma startéru ................................................. Svítí NR siréna .................................................................... Kontrola ATIS ...........................................................................V případě potřeby Výškoměr(y) .......................................................................... Nastaveny Palivo .................................................................... Dostatečné množství Strobe ................................................................................................ON Fuel pump .............................................. ON, zkontrolovat nárust tlaku Nastříknutí paliva ............................................................ Podle potřeby Plyn .............................................................Max 15% (doporučeno 5%) Magneto, plasma ................................................ ON, kontrola bzučáku Prostor........................................................................................... Volný Startér ...............................................................................................ON Tlak oleje ................................ Indikace EPM, kontrolka zhasla Otáčky motoru ......................................................... Volnoběh Alternátor ........................................................... ON, kontrola dobíjení Spojka ................................................................................... ON, zajistit Synchronizace otáček ............................................................... Kontrola Kontrolka spojky ...............................................................................OFF Kontrola zapalování..................................................... Motor 2000 rpm Plasma: 300 rpm, Magneto: 100 rpm pokles Kontrola ohřevu karburátoru ................................520 rpm, HOT, COLD Kontrola volnoběžky............................. Stáhnout plyn, kontrola otáček Ohřev motoru (olej) .......................................................... 400-450 rpm 30°C min, 60°C pro max výkon Dveře ............................................................ Zavřeny, nebo na řemínek Motorové přístroje, kontrolky ............................... V limitech, zhasnuty Přistávací a navigační světla ..............................................................ON Aretace kolektivu ................................................................... Uvolněna Governor ...........................................................................................ON Před startem Startování Před v zlet em Governor ..........................................................................................OFF Otáčky rotoru ............................... pod 400 rpm, potom 400 – 450 rpm Aretace kolektivu ........................................................................ Zajistit Přistávací světlo................................................................................OFF Chlazení motoru ......................... CHT max. 180°C, avšak min. 2 minuty Přípusť plynu .......................................................................... Volnoběh Spojka ................................................................................. Odjistit, OFF Počkat ........................................................................... Rozchod otáček Směs paliva .......................................................................................OFF Zapalování ........................................................................................OFF Alternátor .........................................................................................OFF Palivová pumpa ................................................................................OFF Otáčky rotoru ...................................................................max. 150 rpm Rotorová brzda .................................................................... Dle potřeby Stroboskop .......................................................................................OFF Palivo, časy, HOBBS .............................................. Zaznamenat / vyfotit Navigační světlo ...............................................................................OFF MASTER ............................................................................................OFF Zaznamenat let ......................................................... data.lionheli.aero Vypnutí Guimbal Cabri G2 One-page Checklist CZ rev. 2023-05-09