GULFSTREAM G200 — Systems Description

1 systems description reference for the GULFSTREAM G200.

Overview

TRIM SYSTEM - Jett Air X

This document provides detailed information about the trim systems of the Gulfstream G200 aircraft, including the horizontal stabilizer, lateral, and directional trim systems. It describes the operation, controls, and indicators associated with these systems, as well as safety notes and operational guidelines.

The horizontal stabilizer trim system has two independent electrical systems for redundancy.
Stabilizer travel ranges from +2.5° to -9.5°.
Lateral trim is achieved through ailerons with 1/3 of full travel.
Directional trim is accomplished using a trim tab on the rudder.
The slats and flaps are operated by electrical rotary actuators and hydraulic systems.
Aural warnings are provided for overspeed conditions.
The system includes a bypass function for slats in case of failure.
Asymmetry conditions trigger caution messages on the EICAS.

Summary written by AI from the source document. Check the original before relying on it. See which parts of Sprinkle are written by AI.

Reference only, not for flight. Use the current approved manual for your aircraft. See terms, section 5.

1 document