Skip to main content
Sell

Service Bulletin SNX-SB-001

SONEX Sonex A · Service Bulletins

Free account — keep the POHs & checklists you reference in one place.

Overview

This service bulletin provides instructions for the assembly and welding of the rudder pedal assembly for the Sonex A aircraft. It includes specifications for materials and dimensions necessary for the construction.

  • Weld assembly using number 7 welding rod.
  • Prime with Epoxy Chromate Primer or Powder Coat.
  • Use 4130 steel tubes for construction.
  • Includes specific dimensions for various components.
  • Weld one side only for certain parts.
  • Typical quantities for parts are specified.

Summary written by AI from the source document. Check the original before relying on it. See which parts of Sprinkle are written by AI.

Reference only, not for flight. Use the current approved manual for your aircraft. See terms, section 5.

Document

Source

Copy found at sonexaircraft.com. Sprinkle hosts a reference copy with an added summary, specifications and searchable full text.

View original at sonexaircraft.com

Report a problem or request removal

Document details

Type
·
Service Bulletins
File size
·
35 KB
Copy found at
·
sonexaircraft.com
Language
·
en
How rare is it?
550SONEX Sonex A registered worldwide · 548 active

Common. More common than 93% of the aircraft models we track.

Documentation completeness
2/7

Most owners only have the POH. Here's the essential set for the SONEX Sonex A.

  • Pilot's Operating Handbook / AFM
  • Checklist
  • Maintenance Manual
  • Parts Catalog (IPC)
  • Systems & Wiring
  • Service Bulletins on file
  • Type Certificate (TCDS)
This aircraft
SONEX specs & performanceAll Sonex aircraftCompare SONEX vs…
For sale
All Sonex for saleBrowse all aircraft for saleAircraft wanted ads

Free — save the SONEX to your watchlist and track it in one place.

Your library
All SONEX Sonex A manuals2All Sonex manualsFull manuals libraryMy hangar
Tools
Identify an aircraftTail number lookupAircraft matcherCompare aircraftCan I land here?Where can it land?
Explore Sprinkle
Aircraft directoryManufacturersAirlinesEnginesAircraft for sale
For professionals
List an aircraft for salePost a wanted adDealer & broker directoryData & API licensingData sources

More SONEX Sonex Amanuals & documents

In this document

Rudder Pedal Assembly

Instructions for assembling the rudder pedal assembly using specified materials and welding techniques.

Materials

Details on the types of steel tubes and welding rods required for the assembly.

Dimensions

Specific measurements for various components of the rudder pedal assembly.

Summary written by AI from the source document. Check the original before relying on it. See which parts of Sprinkle are written by AI.

Full document text

sonex Service Bulletin Service Bulletin SNX-SB-001 Page 3 of 3 1 1/64" [25.8mm] 1 1/4" [31.8mm] 17 1/4" [438.1mm] 6 3/4" [171.4mm] 6 3/4" [171.4mm] 33" [838.2mm] 8 1/4" [209.6mm] 5 1/2" [139.7mm] 10 1/2" [266.7mm] SNX-C02-09 Rudder Pedal Assembly Weld Assembly together using number 7 welding rod Prime with Epoxy Chromate Primer or Powder Coat 5/8" x 5/8 x .049 Wall 4130 Square Tube Typical 4 places 3/4" x .035 Wall 4130 Steel Tube Typical 2 places 3/8" O.D. x 1/4" I.D x 7/8" [22.2mm] Long Bushing Stock 1" x .065 Wall 4130 Steel Tube Ring made from 1/8" diameter welding rod and skip welded to 1" diameter tube Note: weld one side only 5/16" O.D. x 3/16" I.D x 7/8" [22.2mm] Long Bushing Stock Typical 2 places

All SONEX Sonex A service bulletins